Cables and Fittings

Example Cables and Fittings


Keuka Swageless Turnbuckles (for 1/8″ Diameter Cables)*

The Keuka Fitting system allows the same fitting to be used on each end of a cable. Each fitting is swageless and each fitting can be tensioned.

*U.S. Patent No. 10,436,23

 


Cable Assembly #1 (for 3/16″ Diameter Cables)

This assembly is used on horizontal cable runs in either metal or wood posts. We factory swage (pronounced swaj) one end of the cable with the S4 threaded stud. The push lock fitting quickly bites down to the opposite end of the cable without any special tools required.

All cables and fittings are made from marine grade Type 316 stainless steel. Cables are available in 1/8″ diameter or 3/16″ diameter with 1×19 construction.

Level fittings shown on both cable ends
For horizontal cable runs

Cable assembly #1 consists of…

  • 1 qty PL-4 Push-Lock
  • 1 qty R-6-32 Receiver
  • 1 qty 1/8″ or 3/16″ Stainless Steel Cable (cut and swaged w/ S4 stud at desired length)


Cable Assembly #2 (for 3/16″ Diameter Cables)

Cable Assembly #2 can be used on any metal post application with stairs or a level run. We factory swage (pronounced swaj) one end of the cable with the F4 ferrule. This assembly incorporates the PL-TE4 Push-Lock with a pivoting eye fitting and the AJTE-6 Adjust-A-Body with a pivoting eye fitting on each end of the cable. The pivoting clevis screws onto the post with a 1/4-20 machine screw. Machine screws are available in multiple lengths for different post sizes. The fitting attaches to the pivoting clevis with the SC-6 screw.

All cables and fittings are made from marine grade Type 316 stainless steel. Cables are available in 1/8″ diameter or 3/16″ diameter with 1×19 construction.

Adjustable swaged fittings on both cable ends

Cable assembly # 2 consists of…

  • 1 qty PLTE-4 Push-Lock w/ eye
  • 1 qty AJTE-6 Adjust-A-Body w/ eye
  • 2 qty Pivoting Clevis
  • 2 qty SC-6 Screw
  • 1 qty 1/8″ or 3/16″ Stainless Steel Cable (cut and swaged w/ S4 stud at desired length)

Cable Assembly #2 Drawing


Cable Assembly #3 (for 3/16″ Diameter Cables)

This cable assembly is used on any wood post application with stairs or level runs. We factory swage (pronounced swaj) one end of the cable with the F4 ferrule. This assembly incorporates the PL-TE4 Push-Lock with a pivoting eye fitting and the AJTE-6 Adjust-A-Body with a pivoting eye fitting on each end of the cable. The LE-6 Lag Eye screws into the face of your wood post or wall. The fitting attaches to the LE-6 Lag Eye with the SC-6 screw.

All cables and fittings are made from marine grade Type 316 stainless steel. Cables are available in 1/8″ diameter or 3/16″ diameter with 1×19 construction.

Cables and Fittings - Cable Assembly 3

Cable assembly #3 consists of…

  • 1 qty PLTE-4 Push-Lock w/ eye
  • 1 qty AJTE-6 Adjust-A-Body w/ eye
  • 2 qty LE-6 Lag Eye
  • 2 qty SC-6 Screw
  • 1 qty 1/8″ or 3/16″ Stainless Steel Cable (cut and swaged w/ S4 stud at the desired length)

Share and Enjoy !

Shares